Urbandrag
06/03/05, 10:20:44
Custom Garret, T3 flange turbo, modded for external Wastegate (turbine housing ceramic coated)
38 mm tial gate (external)
304 grade stainless steel exhaust and flanges (polished)
braided oil feed line and fittings
braided oil return line and fittings
new fuel pump for intank
rising rate regulator (FMU)
fuel lines for the fuel system
map sensor adapter and bleed valve
polished aluminum sheet metal air box
aluminum pcv filter
At the present there will be no intercooler option, this is a street kit, that runs on pump fuel and is designed to be used on a stock engine with 7 psi of boost.(160 hp.) An intercooler is of very little advantage for the street at this low of a boost level. If someone wants to use this kit at the drag strip then the boost level can be raised to 8-10 psi as long as they are using race fuel. This kit is not recommended for top speed runs, for high speed runs there is a race kit in the works, either air/air intercooler, or the new liq/air setup ( in the works) This kit can be installed by most people in about 8 hrs, the more skilled the individual the quicker the install will go.
[Sólo los usuarios registrados pueden ver enlaces.]'s/IMG_1940_8.jpg
[Sólo los usuarios registrados pueden ver enlaces.]'s/IMG_1937_1.jpg
4000 Dolares por 160 mugrosos caballos... :wanka:
38 mm tial gate (external)
304 grade stainless steel exhaust and flanges (polished)
braided oil feed line and fittings
braided oil return line and fittings
new fuel pump for intank
rising rate regulator (FMU)
fuel lines for the fuel system
map sensor adapter and bleed valve
polished aluminum sheet metal air box
aluminum pcv filter
At the present there will be no intercooler option, this is a street kit, that runs on pump fuel and is designed to be used on a stock engine with 7 psi of boost.(160 hp.) An intercooler is of very little advantage for the street at this low of a boost level. If someone wants to use this kit at the drag strip then the boost level can be raised to 8-10 psi as long as they are using race fuel. This kit is not recommended for top speed runs, for high speed runs there is a race kit in the works, either air/air intercooler, or the new liq/air setup ( in the works) This kit can be installed by most people in about 8 hrs, the more skilled the individual the quicker the install will go.
[Sólo los usuarios registrados pueden ver enlaces.]'s/IMG_1940_8.jpg
[Sólo los usuarios registrados pueden ver enlaces.]'s/IMG_1937_1.jpg
4000 Dolares por 160 mugrosos caballos... :wanka: